COSMO 68 flat

Door: nominal wood cross section 68 mm × 81 mm with internal glass profile (Rondò 2 or Classic 2), tapered aluminium profiles with mechanically assembled and/or welded corner joints*, applied using snap-on nylon clips, for a total nominal cross section of 88 mm × 81 mm.

Frame: nominal wood cross-section 68 mm × 70 mm with double thermal acoustic seal, tapered aluminium profiles with mechanically assembled and/or welded corner joints*, applied by means of rotating nylon clips, for a total nominal cross-section of 88 mm × 90 mm.

Window

The window is made with a leaf assembled at 90° with a mechanical fastening system, 33.1-12-4 4S double-glazing with a warm edge spacer, and exterior and interior perimeter finishing with glazing seals.

DK hinges** with gold- and/or silver-coloured finish, gold- and/or silver-coloured aluminium DK handle on the upright of the opening leaf without clamp, with central coupling of symmetrical leaves on windows with two or more leaves.

‘Maico multi-matic’ silver-coloured steel strip hardware with 3 points of closure and upper and lower latches for double-leaf windows, lower frame profile in wood and aluminium, height 90 mm.

French doors

The French doors are made with a leaf assembled at 90° with a mechanical fastening system, with three lower crosspieces (base),
33.1-10-33.1 4S double-glazing with a warm edge spacer, and exterior and interior perimeter finishing with glazing seals.

DK hinges** with gold- and/or silver-coloured finish, gold- and/or silver-coloured aluminium DK handle on the upright of the opening leaf without clamp, with central coupling of symmetrical leaves on windows with two or more leaves.

‘Maico multi-matic’ silver-coloured steel strip hardware with 4 points of closure and upper and lower latches for double-leaf windows, rebate profile in bronze-coloured aluminium (height 25 mm in line with Law 13/89 on the elimination of architectural barriers) and additional seal on the base of the door.

Wooden profiles painted with three coats of water-based paint, aluminium profiles painted with polyester powder heat set at 180°. Parts are painted loose and/or welded*. Interior trim only, cross section 60 mm × 10 mm, rounded on two sides.

features

thermal transmittance k = 1.6 W/(m²·K)

noise reduction 33 db

air permeability class 4