Door: nominal wood cross section 68 mm × 81 mm with internal glass profile (Rondò 2 or Classic 2), tapered aluminium profiles with mechanically assembled and/or welded corner joints*, applied using snap-on nylon clips, for a total nominal cross section of 88 mm × 81 mm.

Frame: nominal wood cross-section 68 mm × 70 mm with double thermal acoustic seal, tapered aluminium profiles with mechanically assembled and/or welded corner joints*, applied by means of rotating nylon clips, for a total nominal cross-section of 88 mm × 90 mm.

Window

The window is made with a leaf assembled at 90° with a mechanical fastening system, 33.1-12-4 4S double-glazing with a warm edge spacer, and exterior and interior perimeter finishing with glazing seals.

DK hinges** with gold- and/or silver-coloured finish, gold- and/or silver-coloured aluminium DK handle on the upright of the opening leaf without clamp, with central coupling of symmetrical leaves on windows with two or more leaves.

‘Maico multi-matic’ silver-coloured steel strip hardware with 3 points of closure and upper and lower latches for double-leaf windows, lower frame profile in wood and aluminium, height 90 mm.

French doors

The French doors are made with a leaf assembled at 90° with a mechanical fastening system, with three lower crosspieces (base),
33.1-10-33.1 4S double-glazing with a warm edge spacer, and exterior and interior perimeter finishing with glazing seals.

DK hinges** with gold- and/or silver-coloured finish, gold- and/or silver-coloured aluminium DK handle on the upright of the opening leaf without clamp, with central coupling of symmetrical leaves on windows with two or more leaves.

‘Maico multi-matic’ silver-coloured steel strip hardware with 4 points of closure and upper and lower latches for double-leaf windows, rebate profile in bronze-coloured aluminium (height 25 mm in line with Law 13/89 on the elimination of architectural barriers) and additional seal on the base of the door.

Wooden profiles painted with three coats of water-based paint, aluminium profiles painted with polyester powder heat set at 180°. Parts are painted loose and/or welded*. Interior trim only, cross section 60 mm × 10 mm, rounded on two sides.

features

thermal transmittance k = 1.6 W/(m²·K)

noise reduction 33 db

air permeability class 4

L'articolo Cosmo68 flat proviene da Nusco SpA: dal 1968, porte e infissi per passione.

Finestra

La finestra è costruita con anta assemblata a 90° con sistema di fissaggio meccanico, vetro camera 33.1-12-4 4S (con listello fisso 33.1-16-4 4S) canalina bordo caldo con finitura perimetrale esterna del vetro con sigillanti siliconici neutri.

Cerniere tipo anuba in acciaio finitura oro e/o argento diametro mm 14, martellina DK in alluminio finitura oro e/o argento, posata sul montante dell’anta apribile senza fascetta, con accoppiamento centrale delle ante simmetrico sugli infissi a due o più battenti.

Ferramenta a nastro “Maico multi-matic” in acciaio finitura silver a 3 punti di chiusura con scrocco superiore e inferiore per infissi a doppio battente. Il profilo di battuta in legno con gocciolatoio in alluminio di colore bronzo con tappi laterali di chiusura ed è applicato a mezzo clip con altezza totale mm 90.

Portafinestra:

La portafinestra costruita con anta assemblata a 90° con sistema di fissaggio meccanico con traverso intermedio ad altezza da terra mm 1000 con due traverse inferiori (zoccolo).

La parte inferiore ha vetrocamera 33.1-10-33.1 4S,la parte superiore 33.1-12-4 4S canalina bordo caldo.

Nella soluzione con listello fisso, si avranno tre traverse inferiori con vetro camera 33.1-15-33.1 4S e nessuno traverso intermedio.

La finitura perimetrale esterna del vetro con sigillanti siliconici neutri. Cerniere tipo anuba in acciaio finitura oro e/o argento diametro mm 14. Martellina DK in alluminio finitura oro e/o argento posata sul montante dell’anta apribile senza fascetta, con accoppiamento centrale delle ante simmetrico sugli infissi a due o più battenti.

Ferramenta a nastro “Maico multi-matic” in acciaio finitura silver a 4 punti di chiusura con scrocco superiore ed inferiore per infissi a doppio battente. Profilo di battuta in alluminio colore bronzo (altezza mm 25 in sintonia con la legge 13/89 per

l’eliminazione delle barriere architettoniche) e guarnizione supplementare alla base dell’anta.

Ciclo di verniciatura a tre applicazioni con vernici all’acqua. Coprifili solo interni sez. mm 60 x 10 arrotondati due lati.

L'articolo Cosmo68 legno lamellare proviene da Nusco SpA: dal 1968, porte e infissi per passione.

Window

The window is made with a leaf assembled at 90° with a mechanical fastening system, 33.1-12-4 4S double-glazing (with fixed stop 33.1-16-4 4S) with a warm edge spacer, and exterior and interior perimeter finished with neutral silicone seals.

Steel anuba hinges with gold- and/or silver-coloured finish, 14-mm diameter, gold- and/or silver-coloured aluminium DK handle on the upright of the opening leaf without clamp, with central coupling of symmetrical leaves on windows with two or more leaves.

‘Maico multi-matic’ silver-coloured steel strip hardware with 3 points of closure and upper and lower latches for double-leaf windows. The wooden rebate profile with bronze-coloured aluminium drip trim and side clip-on caps has a total height of 90 mm.

French doors:

The French doors are made with a leaf assembled at 90° with a mechanical fastening system, with an intermediate crosspiece 1000 mm above the floor and two lower crosspieces (base).

The lower part has 33.1-10-33.1 4S double glazing while the upper part has 33.1-12-4 4S glazing with warm edge spacer.

In the fixed stop solution, there are three lower crosspieces with 33.1-15-33.1 4S double glazing and no intermediate crosspieces.

Exterior perimeter finished with neutral silicone seals. Steel anuba hinges with gold- and/or silver-coloured finish, 14-mm diameter. Gold- and/or silver-coloured aluminium DK handle on the upright of the opening leaf without clamp, with central coupling of symmetrical leaves on windows with two or more leaves.

‘Maico multi-matic’ silver-coloured steel strip hardware with 4 points of closure and upper and lower latches for double-leaf windows. Rebate profile in bronze-coloured aluminium (height 25 mm in line with Law 13/89 on the elimination of architectural barriers) and additional seal on the base of the door.

Painting consists of three coats of water-based paint. Interior trim only, cross section 60 mm × 10 mm, rounded on two sides.

L'articolo Cosmo 68 laminated with glazing bead proviene da Nusco SpA: dal 1968, porte e infissi per passione.